Drinking water vending machines
Живая Вода: покупай воду,
а не бутылки! Береги планету!
Живая Вода: покупай воду,
а не бутылки! Береги планету!

Alive Water Street Air 300 water vending machine

The new model got its name from the English word air.

It is lightweight, compact, quiet, and powerful; it saves resources and allows you to earn more; it also has a lot of other advantages, please see:

  • 300L storage container (previously it was 200L)
  • Lightweight frame (it is easy to install and move)
  • Very compact (it can be installed on any underground floor or in any auxiliary rooms)
  • All elements are easy to access in one plane
  • New mineralizer is made as a flask
  • Money-saving
  • There is a possibility to install a turbine pump to increase the pouring rate (to pour 5L in 15 seconds and 19L in 50 seconds)
Price to be requested
Order

Alive Water. Street water purification and vending machine consists of two blocks: a pure water pouring module and a drinking water purification system of a vandal-proof design.

The pouring module is to be installed at the façade of a building (facility); the purification system is to be installed on the underground floor or in an auxiliary room.

The housing assemblies shall be located at a distance, not exceeding 50 m, from each other. The pouring module is equipped with an automatic heating system with a thermostat and can operate at temperatures to -50ºC.

Alive Water. Street water pouring module has a stylish design, an advertisement frame to place information, a night illumination system, an information display, and stickers.

The machine accepts coins, ic-cards, and banknotes

The machine control board is of in-house manufacture; it has a GSM module and a slot for cash register equipment connection.

Alive Water. Air 300 purification system is vandal-proof and is intended for unrestricted access facilities. It is to be connected to the water supply system, sewage system, and power supply of a building.

The system includes an advanced 8-stage purification system to additionally purify municipal source water, thus allowing the production of the first category water meeting Russian and international quality standards; such water does not have any off-flavour, smell, or scale.

For maintenance service convenience, the system has gauges to measure the inlet pressure of source water and osmosis membrane pressure, as well as devices to monitor the ratio of pure water production to reject water (per minute) and it has a flow-type TDS meter.

Features:

300L storage container
Drinking water output capacity: 150 L/hour
The pouring module housing assembly is made of AISI304 food grade STAINLESS steel of foreign manufacture
The pouring chamber is made of AISI304 mirror polished food grade stainless steel of foreign manufacture
The storage container is made of AISI304 mirror polished food grade stainless steel of foreign manufacture
The membrane pressure regulator is automatic
There is a big 4-line display (to display the price per litre, maintenance service phone number, and the date of previous filter replacement)
There is a possibility to set different price per litre depending on the mode of payment: either in cash, or by change cards
The devices to monitor water output - rotameters and manometers - are graduated in Litres and kg/cm2
Transparent containers for cartridges (to visually monitor the condition of filter elements)
Luminous instruction and all stickers
Remote control of the machine operation (dashboard)
The machine accepts coins, contactless cards*, and banknotes *
Operating mode temperature: -50...+50ºC
Pouring rate: 12 L per minute
Higher vandal-proof level (2 locks on the pouring module)
Reinforced door having a constraint to prevent removal and having a protection for the payment system
Reinforced housing assembly; vandal-proof plastic
Integrated visual security alarm system
Personal manager (consulting: purchase, installation, operation, network development)

Pouring module  
Weight 80 kg
Door 5 mm Plexiglas door with a handle
Power supply 220-240V 50Hz
Container 300L container made of stainless steel 
Water pouring chamber made of stainless steel
Required pressure in water supply line is  0,4 MPa
Payment system coin acceptor
illuminated advertisement frame 45×26 cm
Consumed power at operating mode 100W
Operating temperature -50...+50ºC
Dimensions W x D x H 800 х 350 х 1215 mm
Air 300 type purification system  
Weight 65 kg
Dimensions W x D x H 605 х 700 х 1305 mm
Consumed power at operating mode 700W
Water pouring rate 12 L / min
Water purification 8 stages for additional water purification
Operating temperature +5...+50ºC
Output capacity 100 L/hour
Power supply 220-240V 50Hz


*Banknote acceptor + card reader (option)
* - There is an anti-vandal version on the image = (option)

  • Noiseless feeding pump (NEW!!!)
  • Change giving function 
  • Coin acceptor + change card reader 
  • Turbine pump (it triples the pouring rate)
  • Separate change card reader 
  • A key fob for change 
  • Premium design of the machine front part made of mirror polished stainless steel
  • Closed purification system
  • Container capacity increase up to 500L
You are not sure which to choose, are you?
We are ready to render assistance with choosing the best options based on all characteristics and requirements to set up a successful business. Get a consultation

Create an order

Our manager will contact you to confirm your order

Ask a question

Enter your contact info and our manager will contact you.

Contact us

Please enter some information about yourself and our manager will contact you

Consultation needed?

Enter your contact info and our manager will contact you.

Business plan

Please enter your data to receive a business plan