Drinking water vending machines
Живая Вода: покупай воду,
а не бутылки! Береги планету!
Живая Вода: покупай воду,
а не бутылки! Береги планету!

Alive Water Street Air 500 water vending machine

The new model got its name from the English word air.

It is lightweight, compact, silent, and powerful; it saves resources and allows you to earn more; in addition, it has a lot of other advantages, please see:

  • 500 L storage container! 
  • Lightweight frame (it is easy to install and move)
  • Very compact (it can be installed on any underground floor or in any auxiliary rooms)
  • All elements are easy to access in one plane for service
  • New mineralizer is made as a flask
  • Money-saving (it saves resources)

There is a possibility to install a turbine pump to increase the pouring rate (to pour 5L in 15 seconds and 19L in 50 seconds)

Price to be requested
Order

Alive Water. Street water purification and vending machine consists of two blocks: a pure water pouring module and a drinking water purification system of a vandal-proof design.

The pouring module is to be installed at the façade of a building (facility); the purification system is to be installed on the underground floor or in an auxiliary room. The housing assemblies shall be located at a distance, not exceeding 50 m, from each other. The pouring module is equipped with an automatic heating system with a thermostat and can operate at temperatures to -50º C.

Alive Water. Street water pouring module has a stylish design, an advertisement frame to place information, a night illumination system, an information display, and stickers.

The machine accepts coins, ic-cards*, and banknotes *

The machine control board is of in-house manufacture; it has a GSM module and a slot for cash register equipment connection.

Alive Water. Air 500 purification system is vandal-proof and is intended for unrestricted access facilities. It is to be connected to the water supply system, sewage system, and power supply of a building.

The system includes an advanced 8-stage purification system to additionally purify municipal source water, thus allowing the production of the first category water meeting domestic and international quality standards; such water does not have any off-flavour, smell, or scale.

For maintenance service convenience, the system has gauges to measure the inlet pressure of source water and osmosis membrane pressure, as well as devices to monitor the ratio of pure water production to reject water (per minute) and it has a flow-type TDS meter.

Features:

500 L storage container!
Drinking water output capacity: up to 150 L/hour
The pouring module housing assembly is made of AISI304 food grade STAINLESS steel of foreign manufacture
The pouring chamber is made of AISI304 mirror polished food grade stainless steel of foreign manufacture
The storage container is made of AISI304 mirror polished food grade stainless steel of foreign manufacture
The membrane pressure regulator is automatic

There is a big 4-line display (to display the price per litre, maintenance service phone number, and the date of previous filter replacement)
There is a possibility to set different price per litre depending on the mode of payment: either in cash, or by change cards
The devices to monitor water output - rotameters and manometers - are graduated in Litres and kg/cm2
Transparent containers for cartridges (to visually monitor the condition of filter elements)
Luminous instruction and all stickers
Remote control of the water vending machine operation (personal account)
The drinking water vending machine accepts coins, contactless cards*, and banknotes *
Operating mode temperature: -50° C...+50° C
Pouring rate: 12 litres per minute
Higher vandal-proof level (2 locks on the pouring module)
Reinforced door having a constraint to prevent removal and having a protection for the payment system
Reinforced housing assembly; vandal-proof plastic
Integrated visual security alarm system
Personal manager (consulting: purchase, installation, operation, network development)

Pouring module    
Weight 80 kg
Door 5 mm Plexiglas with a handle
Power supply 220-240V 50Hz
Container capacity 500L, stainless steel  
Water pouring chamber Stainless steel
Required pressure in water supply line 0.4 MPa
Payment system Coin acceptor 
Illuminated advertisement frame 35×17 cm
Consumed power at operating mode 100 W
Operating temperature -50° C....+50° C
Dimensions: W х D х H 800 x 350 x 1215 mm
Air 300 type purification system  
Weight 65 kg.
Dimensions: W х D х H 605 x 895 x 1305 mm
Consumed power at operating mode 25 W
Water pouring rate 12 L/min
Stages of purification 8
Operating temperature +5....+50 сº
Output capacity 100 L/hour
Power supply 220-240V 50Hz

*Banknote acceptor + card reader (option)
* - There is an anti-vandal version on the image = (option)

  • Noiseless feeding pump (noise level: 35dB, like a whisper) 
  • Payment terminal to accept contactless bank cards 
  • Change giving function
  • Banknote acceptor (mdb protocol) + change card reader 
  • Turbine pump (it triples the pouring rate) 
  • Separate change card reader
  • Key fob for change
  • Premium design of the machine front part made of mirror polished stainless steel
  • Closed purification system
  • RGB illumination of the pouring chamber with a remote control
  • RGB illumination of the advertisement frame
You are not sure which to choose, are you?
We are ready to render assistance with choosing the best options based on all characteristics and requirements to set up a successful business. Get a consultation

Create an order

Our manager will contact you to confirm your order

Ask a question

Enter your contact info and our manager will contact you.

Contact us

Please enter some information about yourself and our manager will contact you

Consultation needed?

Enter your contact info and our manager will contact you.

Business plan

Please enter your data to receive a business plan